Coaxial Cable Extruder Machine
Application: Coaxial cable extruder machine used to make coaxial cable such as IEEE1394, cat5e, DVI, ATA, UL2919, CATV, RG, JIS etc. Feature of coaxial cable coating line Machine high automized, adopt PLC control, machine easy to operate. Each type cable production data can be recorded which...
Coaxial cable extruder machine used to make coaxial cable such as IEEE1394, cat5e, DVI, ATA, UL2919, CATV, RG, JIS etc.
Feature of coaxial cable coating line
Machine high automized, adopt PLC control, machine easy to operate.
Each type cable production data can be recorded which convenient for machine operation.
Extrusion line has very low production waste.
Physical foaming or chemical foaming can make skin-foam-skin, skin-foam or foam-skin.
Production line automatic stop when any fault happens.
Main data for coaxial cable jacketing line
Definition of coaxial cable.
Coaxial cable is a specific type of cable that consists of four layers of material. There is an inner conductor, a dielectric insulating layer, another conductive layer, and an insulating layer. The cable is called coaxial because both the inner and outer conductive layers are on the same geometric axis. A geometric axis is a line passing through the length of the material.
These cables are designed to be used for radio frequency transmissions. The purpose of the multiple layers is to restrict the electromagnetic field generated by the signal to interior of the cable itself. Using this development, the amount of electromagnetic interference through the cable is reduced.
The inner conductor can be either solid or stranded in design. Stranded is the preferred wire type, due to its greater degree of flexibility. An option to improve performance is to purchase a coaxial cable with a silver plated inner conductor. The other option is a copper-plated iron wire.
The next layer is insulation, which can be made from foam plastic, air with spacers to hold the inner wire and stop it from touching the shield, solid plastic or solid Teflon?. In cables with a low level of electrical loss, a polyethylene insulation is often used. The higher quality the insulation, the greater the cost.