Cable Coating Production Line
Cable coating production line applies to extruding insulation or sheath of copper cable, cable making material can be PVC, PP, PA, PU, PBT etc. Cable coating extruder machine adopts programmable logic control (that is PLC mode) to realize the line's synchronal running and the independent...
Cable coating production line applies to extruding insulation or sheath of copper cable, cable making material can be PVC, PP, PA, PU, PBT etc.
Cable coating extruder machine adopts programmable logic control (that is PLC mode) to realize the line's synchronal running and the independent operation, which can realize the production operation, the warning display, the line's emergency and other functions.
Cable coating extrusion line:
L/D of screw
Folds type W/U type
L/D of screw
26:1 BM type
Single/double layer U type
Preparations before running cable coating machine
1. Get measuring and operating tools such as scissors, sharp-nose plier, monkey wrench, hex wrench, threading pin, gauges etc. ready.
2. Get the required raw materials, dies and auxiliary devices ready.
3. Check whether the power and water supply is normal.
4. Turn on the main extruder power, set required temperature for each separate item on the temperature control panel.
5. Put the suction tube which is connected with the auto-suction machine into the container that keeps the granual for extruding. Turn on the power of the auto-suction machine and the dyer, set suction time to add required granual in the hopper. set required temperature for granual dryer.
6. Install inside and outside eyemold, adjust the distance.
7. By extruding(with or without copper) to test eccenticity. If it is eccentric, then ajust inside and outside eyemold accordingly.