Dongguan Hongrong Electrical Machinery Co.,Ltd

High quality products and professional service are the core suppliers of the machinery industry.

Cantilever Single Twisting Machine

Cantilever Single Twisting Machine HR-1250 cantilever single twisting machine applied for twisting and continuous taping of PVC/PE cable, flexible cable, coaxial cable, SJT, SBT cable etc. This line twisting pitch 40-400mm, PLC set and control, twisting pitch very stable and easy to adjust....

Send Inquiry
Product Details

Cantilever Single Twisting Machine
HR-1250 cantilever single twisting machine applied for twisting and continuous taping of PVC/PE cable, flexible cable, coaxial cable, SJT, SBT cable etc. This line twisting pitch 40-400mm, PLC set and control, twisting pitch very stable and easy to adjust.

 

Feature of cantilever single twist cabling machine:
SZ stranding.
Twisting pitch 40~400mm
Taping pitch stepless adjustment through motor.
Machine auto stop when meter get preset data.
Machine auto stop when wire/tape break.
Safety precautions (Bobbin lock, Door alarm、Pallet fix position etc).

 

Main data for cantilever single twist buncher:
1. Wire collect board: now provide 1+6+12 type, other type still can make.
2. Taping device: taping material can be cotton tape, maylar, aluminum foil etc.
Tape bobbin: hole 2" bobbin ø460mm
Width: 15~40mm
3. Meter counter: 1m=2.5 circles
4. Main drive: 40HP AC motor with inverter.
Take-up drive: 18.5KW DC motor;
Traverse drive: 2HP AC motor with inverter.
5. Inlet wire: ø1.0mm~ø4.0mm insulated wire.
Finished wire: Max=ø20mm
6. Rotational speed: Max=450rpm

 

Our factory

image001_副本.jpg

 

FAQ
Installation of cantilever wire twist bunching machine
1. Make sure that the floor is even, place the machine on flat floor. Commissioning without load after wiring to make sure machine running no problem, then lock the foundation screw.
2. Connect wire to terminal block after machine fixed position, then check the wiring correct or not.
3. Three phase power capacity have to more than the current of control box power.
4. Make sure correct earth wiring in case of current leakage or electromagnetic interference. 220V──the third earth wiring; 380V──special earth wiring。
5. Check voltage correct and stable before giving power to the machine.
6. Make "control" ON in control panel after giving power, rotate the cantilever till the cantilever fix position lamp lighting.
7. Open the door of the machine, press the pallet lift button to check if work.
8. If pellet not rise, then cut the main power and change phase position.


Hot Tags: cantilever single twisting machine, China, manufacturers, suppliers, factory
Related Products
Inquiry